KAFT SERIES HIGH BANDWIDTH ACCELEROMETER
KAFT Series High Bandwidth Aeccelerometer
[ KAFT 10.22 ]
The KAFT Series of High Bandwidth Miniature Accelerometers offer a compact and robust solution for the motorsports and automotive testing industry.
The sensor offers 2 or 3 Axis of measurement with integral signal conditioning to give a standard signal of 0.5 to 4.5V; ideal for most data acquisition systems.
Supply voltage can be 5V or 8-16V with low current consumption of less than 30mA.
With a bandwidth of DC upto 4000Hz (range dependent) these sensors are useful for applications within component, full vehicle testing and development programs.
Technical Specifications
Features
Applications
Technical Specifications
Connection Details
Features
| High Bandwidth | ±5g to ±100g | 2 or 3 Axis Outputs |
| DC Response | Rugged Design | Built-In-Amplifier |
Applications
| Structural Analysis | Aero Performance | Suspension Test |
| Road Load Data | __ | __ |
Technical Specifications
| Range (g) | Standard Ranges: 5, 10, 20, 50, 100 |
| Bandwidth | Ranges 5, 10g: 0-1500Hz Ranges 20, 50, 100g: 0-4000Hz |
| Resonant Frequency | 5kHz for 5, 10g 20kHz for 20, 50, 100g |
| Safe Over Range | ±5000g |
| Accuracy | <±0.25% FS Linearity |
| Cross Axis Sensitivity | <±2% FS |
| Thermal Effects | Zero ±0.03% FS/°C (Sensitivity ±0.03% of Reading /°C) |
| Output | 0.5V to 4.5V (Offset 2.5V) |
| Supply | 5V (±0.5V) Ratiometric or 8-16Vdc |
| Operating Temperature Range | -40°C to +125°C |
| Compensated Temperature Range | 0°C to +100°C |
| Noise | >30ug/Hz |
| Construction | Anodised Aluminium |
| Electrical Connection | 100cm, 26AWG 55 Spec wire + DR25 Sleeve |
| Protection Class | IP66 |
| Weight | <30g (Excluding Cable) |
| KA Sensors adopts a continuous development program which sometimes necessitates specification changes without notice. | |
Connection Details
| +Ve Supply | 0V Supply | Output (X) | Output (Y) | Output (Z) |
|---|---|---|---|---|
| Red | Black | White | Blue | Green |
Part Number Configurator
Mechanical Details
