RHL SERIES RHL 4 LASER RIDE HEIGHT SENSOR
RHL Series RHL 4 Laser Ride Height Sensor
[ RHL 4 08.22 ]
The RHL Series of Laser Ride Height Sensors are designed to withstand the harsh environments of industrial and motorsport applications. Our Miniature Sensor incorporates a small diameter visible laser that is reflected off the track surface to a precision CCD detector which determines the height from the ground.
Supplied with standard measurement ranges of 200mm or 500mm, the RHL4 is ideal for use on all types of vehicle. With a measurement rate of up to 4KHz along with several filter option and linearity of 0.1% ensures a fast and accurate recording of real-time car data in extreme conditions. On-board compensation ensures that different track colours and surfaces are correctly measured without error.
The RHL4’s construction of anodized aluminium provides protection against high vibration and temperature. A choice of electrical connection; either Souriau connector or a low profile cable exit can be selected.
| Miniature Size | 200 & 500 mm Range | Cable or Connector |
| 4KHz Measurement Rate | IP67 Standard Sealing | ±0.1% Linearity |
| Ride Height | Suspension Setup | Chassis Distortion |
| Bodywork Deflection | __ | __ |
| Ranges | 200mm (60-260) or 500mm (100-600) |
| Resolution | 0.02mm |
| Linearity | ±0.1% of Full Scale |
| Measurement Rate | 250, 500, 1000, 2000, 4000Hz (Factory Set) |
| Averaging Filter | 9 Position and Moving 32 Step |
| Thermal Effects | 0.03% FS/°C |
| Output | 1 to 5V |
| Ambient Light | <10,000Lx |
| Supply | 11-30V (50mA) |
| Operating Temperature Range | 0°C to +70°C |
| Operating Temperature Range | -20°C to +70°C |
| Construction | Black Aluminium Casing |
| Electrical Connection | Cable: 26AWG, 55 Spec Wire + DR25 Sleeve Connector: Souriau 8STA-0-02-05-PN |
| Protection Class | IP67. Dust tight & water immersion to 1m for 30mins |
| Laser Type | 1mW, 670nm, Class 2 (DIN EN 60825-1 2008) |
| Vibration and Shock | 20G 10Hz-1kHz & 15G 6ms (IEC 68-2-29) |
| Weight | 50g (Excluding Cable or Mating Connector) |
KA Sensors adopts a continuous development program which sometimes necessitates specification changes without notice | |
| +Ve Supply | 0V Supply | Signal | Not Connected |
|---|---|---|---|
| Red (Pin1) | Black (Pin2) | White (Pin3) | Pin 4 & 5 |
| Wire Colours (Pin Numbers for Connector Type Souriau 8STA-0-02-05-PN) | |||
Part Number Configurator
Mechanical Details
