RPICK-15K MAGNETIC PICK UP SENSOR

RPICK-15K – Magnetic Pick up sensor

SUPER-SENSITIVE MAGNETIC PICK UP SENSORS

FEATURES :
  1. DETECTS STEEL SENSING GEARS OR OTHER MOVING FERROUS TARGET
  2. BUILT-IN PULSE SHAPING AMPLIFIER PROVIDES ULTRA-LOW- SPEED OPERATION WITH LARGE AIR GAPS
  3. M10 / M12 / M16 THREADING DIAMETER METAL CASE
  4. TWO OUTPUT SIGNAL VERSIONS
  5. EPOXY ENCAPSULATED SENSOR FOR OIL, DIRT & MOISTURE RESISTANCE
  6. SUITABLE FOR DIESEL ENGINE FLYWHEEL RPM MEASUREMENT, AUTOMOTIVE TSTING

DESCRIPTION

AEINSTRON RPICK MAGNETIC PICKUPS provide sensing sensitivities several orders of magnitude greater than standard magnetic pickups when detecting moving ferrous targets. By locating a high gain pre-amplifier & signal processing circuit “inside” the magnetic pickup housing, larger air gaps and slower target surface speeds can be achieved thereby greatly expanding application versatility as compared with conventional magnetic pickups. In addition, these units have excellent noise immunity and a frequency response to 15 KHz.

SPECIFICATIONS

  1. SUPPLY VOLTAGE : No supply Required
  2. OPERATING FREQUENCY (all versions): 15 KHz max.
  3. OPERATING TEMPERATURE: -18°C to +80°C (0°F to +176°F)
  4. CONSTRUCTION: Epoxy encapsulated metal body
  5. Threading Size Metric : M10 / M12 / M16
  6. Inch: As per requirement
  7. OUTPUT CONNECTOR: 3-pin MS Male connector or Direct wire output

OUTPUT PIN CONFIGURATION

PIN NO : 1 = SHIELD [ Must be connected to System Ground ] PIN NO; 2 = OUT+ Sine Wave Output SignalPIN NO: 3= OUT – Sine Wave Output Signal