The signals from the vibration sensor are amplified and conditioned by the accelerometer unit itself before being passed to the data acquisition system through a disturbed industrial medium.

Our accelerometers are equipped either with a voltage output or a 4-20 mA current output.

The RECOVIB® accelerometers offer galvanic isolation of the signal conductors.
An additional isolation module is therefore not needed.

Multiple sensors can be distributed in multiple locations and connected to the same acquisition system without signal degradation, even in environments with high ground potential differences due to heavy electrical loads operating in close proximity.

IAC-Seismic: for very hight resolution (background noise lower than 2µg/ sqrt(Hz))

For more details visit – https://gaxcesensors.com