Industrial Accelerator

Industrial Accelerometer in India RECOVIB INDUSTRIAL ACCELEROMETERS

The RECOVIB® industrial accelerometers bridge the gap between the performance of laboratory accelerometers (which are often expensive, fragile and offer low protection) and the robustness of industrial accelerometers (which are sometimes cheaper but often noisy and inaccurate). Our accelerometers can be deployed in industrial environments for monitoring machinery or structures. The RECOVIB® accelerometers are of proven design and the majority of the models available are widely used in a variety of fields, such as the machine tools, precision machining and on-shore and off-shore wind energy sectors in monitoring or active vibration control applications.

Get RecoVib Tiny model in India from Gaxce Sensors

LEVEL OF PROTECTION

The RECOVIB® accelerometers are sealed to an ingress protection level of IP67. We are able to design and develop custom-made units using special protective materials (for example, 316L stainless steel for marine environments).

GALVANIC ISOLATION

The RECOVIB® accelerometers offer galvanic isolation of the signal conductors. An additional isolation module is therefore not needed. Multiple sensors can be distributed in multiple locations and connected to the same acquisition system without signal degradation, even in environments with high ground potential differences due to heavy electrical loads operating in close proximity.\

WIDE FREQUENCY RANGE WITH LOW FREQUENCY RESPONSE

The RECOVIB® accelerometers operate down to DC allowing for the accurate measurement of low frequency signals. They are therefore also suitable for the monitoring of slow processes (such as monitoring the foundation movements of an off-shore wind turbine etc.).

CURRENT OUTPUT 4-20 MA

1 axis 2 axis 3 axis Measuring Range Max Bandwidth Noise Level
IAC-I-01 IAC-I-02 IAC-I-03 ± 2 g 0..1000 Hz 50 µg/√Hz
IAC-HiRes-I-01 IAC-HiRes-I-02 IAC-HiRes-I-03 ± 2 g 0..400 Hz 8µg/√Hz
IAC-HiRes-I-01 IAC-HiRes-I-02 IAC-HiRes-I-03 ± 5 g 0..600 Hz 10µg/√Hz
IAC-HiRes-I-01 IAC-HiRes-I-02 IAC-HiRes-I-03 ± 10 g 0..1000 Hz 13 µg/√Hz
IAC-HiRes-I-01 IAC-HiRes-I-02 IAC-HiRes-I-03 ± 25 g 0..1500 Hz 28 µg/√Hz
IAC-HiRes-I-01 IAC-HiRes-I-02 IAC-HiRes-I-03 ± 50 g 0..2000 Hz 53 µg/√Hz
IAC-HiRes-I-01 IAC-HiRes-I-02 IAC-HiRes-I-03 ± 100 g 0..2500 Hz 100 µg/√Hz
IAC-HiRes-I-01 IAC-HiRes-I-02 IAC-HiRes-I-03 ± 200 g 0..3000 Hz 200 µg/√Hz
IAC-HiRes-I-01 IAC-HiRes-I-02 IAC-HiRes-I-03 ± 400 g 0..4000 Hz 400 µg/√Hz
Dimensions
  • L:23 x l:23 x H:14 mm
  • L:27 x l:27 x H:18 mm
  • L:39 x l:37 x H:31 mm

VOLTAGE OUTPUT

1 axis 2 axis 3 axis Measuring Range Max Bandwidth Noise Level
IAC-U-01 IAC-U-02 IAC-U-03 ± 2 g 0..1000 Hz 50 µg/√Hz
IAC-U-01 IAC-U-02 IAC-U-03 ± 6 g 0..1000 Hz 50 µg/√Hz
IAC-HiRes-Ud-01 IAC-HiRes-Ud-02 IAC-HiRes-Ud-03 ± 2 g 0..400 Hz 5 µg/√Hz
IAC-HiRes-Ud-01 IAC-HiRes-Ud-02 IAC-HiRes-Ud-03 ± 5 g 0..600 Hz 7 µg/√Hz
IAC-HiRes-Ud-01 IAC-HiRes-Ud-02 IAC-HiRes-Ud-03 ± 10 g 0..1000 Hz 10 µg/√Hz
IAC-HiRes-Ud-01 IAC-HiRes-Ud-02 IAC-HiRes-Ud-03 ± 25 g 0..1500 Hz 25 µg/√Hz
IAC-HiRes-Ud-01 IAC-HiRes-Ud-02 IAC-HiRes-Ud-03 ± 50 g 0..2000 Hz 50 µg/√Hz
IAC-HiRes-Ud-01 IAC-HiRes-Ud-02 IAC-HiRes-Ud-03 ± 100 g 0..2500 Hz 100 µg/√Hz
IAC-HiRes-Ud-01 IAC-HiRes-Ud-02 IAC-HiRes-Ud-03 ± 200 g 0..3000 Hz 200 µg/√Hz
IAC-HiRes-Ud-01 IAC-HiRes-Ud-02 IAC-HiRes-Ud-03 ± 400 g 0..4000 Hz 400 µg/√Hz
Dimensions
  • L:27 x l:27 x H:18 mm
  • L:30 x l:30 x H:20 mm