3-AXIS SHOCK & VIBRATION DATA LOGGER

BENEFITS

Our new wireless vibration recorder, the RECOVIB Tiny measures vibrations and shocks in all three axis. It is extremely practical for a vibration diagnosis, offering up to 6 hours of measurement. Its wireless technology and intuitive operation provides substantial time savings in the performance of your measurements. It is the only type of vibration and shock recorder that allows several sensors to be used simultaneously in a synchronized manner enabling the performance of modal analyses and operational deflection shape analyses on large structures such as bridges or walkways. We offer different measuring ranges : ± 2/6G, ± 15G, ± 200G. It is able to record 1024 acceleration values (shocks and vibrations) per channel per second. The RECOVIB Tiny is the smallest, lightest and the most robust recorder on the market that is able to perform recordings in extreme conditions ranging from -10°C to +50°C. It is also dust and water tight to IP65.

POSSIBLE USE

  • “Quick & dirty” vibration monitoring & diagnosis
  • Remote vibration diagnostic/consultancy
  • Vibration measurement on rotating parts
  • Vibration modal analysis
  • Structural analysis and health monitoring
  • Machine tools – Automotive – Aviation
  • Traffic and transport sector

PROPERTIES

  • 3 axis
  • DC to 250Hz useful bandwidth
  • Low noise
  • 6-hours battery autonomy (1024 samples/second)
  • 2 GB storage capacity
  • Wireless during vibration measurements
  • Compact and rugged design
  • Protection grade IP65 – Total protection against dust & splashing water
  • Several sensors can measure synchronously and si- multaneously
  • Synchronization in millisecond level for several hours

BLOCK DIAGRAM

OPERATION

To set up the RECOVIB Tiny, all you have to do is to connect the sensor to a PC or a smartphone via a USB connection. The supplied software allows for time synchronization with the PC, selection of the measuring range, as well as programming of the measurement interval.

When the sensor is disconnected from the PC or the smartphone and when the preset measurement start time is reached, the RECOVIB.Tiny begins to autonomously measure and store vibration values. Once the preset stop time is reached, the RECOVIB. Tiny goes into sleep mode until it is reconnected to the PC or the smartphone.

The RECOVIB Tiny is therefore recognized by the PC or the smartphone as an external storage device. Thanks to the supplied software, the measurements of one or more sensors stored in a compact binary format can be converted to standard formats depending on user preference (text, CSV, MATLAB™, LabVIEW™ formats). The Recovib Tiny is supplied with magnets for easy mounting

When several synchronized sensors are used for a measurement, all the data are stored in one single file with one single time stamp

CERTIFICATIONS

STANDARD STANDARD REFERENCE LIMIT LEVEL
EMC COMPLIANCE Radiated Emission EN 55016-2-3/CISPR 16-2-3 EN/IEC 61000-6-3 30MHZ – 1 GHZ
Electrostatic Discharge Immunity EN / IEC 61000-4-2 4 kV by contact 2, 4 & 8kV in air Criterion B
Magnetic Field Immunity EN / IEC 61000-4-8 80 A/m 50 & 60 Hz Criterion A
Radiated, radio-frequency, electromagnetic field immunity EN/IEC 61000-4-3 80 MHz – 1 GHz 10 V/m 1.4 – 2.0 GHz 3 V/m 2.0 – 2.7 GHz 1 V/m AM 80% 1 KHz Criterion A
DUST & WATER INGRESS PROTECTION LEVEL Degree of Protection provided by enclosures (IP code) IEC 60529 IP65

SPECIFICATIONS

Model ± 2g or ±6g ± 15g ± 200g
MEASUREMENT CHARACTERISTICS Lower frequency limit 0Hz (DC)
Passband frequencies x, y, z axes (-3dB) 250 Hz
AC – Response sensitivity error (max) 3% 3% 3%
Storage rates (per channel) Output unit 1024 samples per second m/s2 – g
Residual noise density 30 μg/√Hz 300 μg/√Hz 2600 μg/√Hz.
Non-linearity ± 0,5 % F.S. ± 0,3 % F.S. ± 0,5 % F.S.
Residual noise (250 Hz bandwidth 475 μg 4,75 mg 75 mg
Transverse sensitivity ± 2 % ± 2 % ± 2 %
Sensor technology MEMS
AUTONOMY Battery 6 hours
Storage 2 GB
OUTPUTS FORMATS Binary, txt, CSV, NI LabVIEW, MATLAB (Level 5 MAT-file)
ENVIRONMENTAL CHARACTERISTICS Operating Temperature range -10 .. 50°C
Temperature coefficient of sensitivity ± 0,01 %/°C ± 0,01 %/°C ± 0,02 %/°C
Temperature drift of zero point ± 0,4 mg/°C ± 1 mg/°C ± 30 mg/°C
Protection grade IP65
MECHANICAL DATA Weight 33.5gr
Case Material

DIMENSIONS

RECOVIB SUITE SOFTWARE

SIGNAL PROCESSING BLOCK DIAGRAM

SIGNAL PROCESSING BLOCK DIAGRAM

REQUIREMENTS

Android
MINIMUM CONFIGURATION RECOMMENDED CONFIGURATION
Minimum SDK Version : Android 4.4 (Kitkat) – API Level 19 Target SDK Version : Android 7.0 (Nougat) – API Level 24
RAM Memory : 2GB RAM Memory : 4GB or more
USB OTG – USB Host USB OTG – USB Host
Windows
MINIMUM CONFIGURATION RECOMMENDED CONFIGURATION
Windows 7 Windows 10
64-bit operating system, x64-based processor 64-bit operating system, x64-based processor
RAM Memory : 2GB RAM Memory : 4GB (8GB or more for large projects manipulation)
DirectX10 compatible GPU

ORDER REFERENCE

Sensors

RECOVIB-TINY 2G/6G 3-axis logger ± 2g or ± 6g range (software selectable)
RECOVIB-TINY 15G 3-axis logger ± 15g range (fixed)
RECOVIB-TINY 200G 3-axis logger ± 200g range (fixed)
Each logger comes with 2 pot magnets and a USB cable. It is intended to be stored in a specially designed suitcase.

Accessories

TINY-SUITCASE-1-EU Suitcase for one RECOVIB-TINY Sensor
TINY-SUITCASE-1-UK
TINY-SUITCASE-1-US
Each suitcase includes a USB key with the software, a flat key, a screwdriver, a charger and has been designed for storing one data logger (including pot magnets and a USB cable).
TINY-SUITCASE-5-EU Suitcase for two to five RECOVIB-TINY Sensors
TINY-SUITCASE-5-UK
TINY-SUITCASE-5-US
Each suitcase includes a USB key with the software, a flat key, a screwdriver, a charger (simultaneous charging of up to 5 sensors) and has been designed to store up to 5 data loggers (including pot magnets and a USB cable).

Android App

RECOVIB Tiny
Downloadable on your Android devices via Google Play Store free of charge.

Computer Software

RECOVIB Suite Computer Software
  • Available free of charge and delivered inside the suitcase
  • Downloadable via our website
  • Automatic updates