Product

OQSx-G2 HAZ- ZON 2 CERTIFIED

Zone 2 certified to ATEX, IECEx, UKEX, and Class 1 Division 2 US/C standards allowing real time oil condition analysis for hazardous area industrial and commercial applications. OQSx-G2 HAZ is a high-performance real-time oil condition analysis sensor for use in most explosion hazardous areas.

Zone 2 certified to ATEX, IECEx, UKEX, and Class 1 Division 2 US/C standards allowing real time oil condition analysis for hazardous area industrial and commercial applications.

OQSx-G2 HAZ is a high-performance real-time oil condition analysis sensor for use in most explosion hazardous areas.

It delivers the ultimate high-quality real-time oil condition analysis. This enables multiple tangible operating benefits that include reduced maintenance costs, improved reliability, reduced oil wastage, and extended equipment life.

Our unique FSH™ core technology analyses oil condition holistically, detecting, measuring, and tracking all and any contamination or wear with 0.01% sensitivity (10ppm) – other sensor systems typically look at specific parameters and ignore others. This unmatched real-time complete oil analysis capability is achieved through continuous analysis of the electro-chemical properties of the oil at a molecular level.

OQSx-G2 HAZ works with any oil type with any equipment operating in any application. It is certified ATEX Zone 2/intrinsically safe/ Class 1 Div 2

  • REAL TIME ANALYSIS – Continuous real-time oil condition with 0.01% sensitivity, detecting and reporting changes caused by wear and/or contamination
  • RELIABLE ACCURACY – Our unique molecular level analysis technology means that the smallest changes down to 100ppm are detected and reported in real-time. This enables us to reliably track oil wear and immediately detect contamination or equipment issues at the earliest stage
    ANY OIL TYPE AND
  • EQUIPMENT – Can be fitted and used on any equipment type operating in any environment using any oil type – mineral or synthetic
  • REDUCE MAINTENANCE COSTS – Analysis-based rate of change and EoL enables accurate trend analysis to identify optimal extended maintenance intervals based on real equipment status. Typically reduces maintenance by up to 50%
  • REDUCED DOWNTIME – Unseen equipment issues cause subtle changes to oil condition, which are detected and alerted, enabling pre-emptive maintenance before failure or major damage or accelerated wear
  • ENVIRONMENTAL (ESG) TARGETS: – Safely maximise oil life to reduce consumption by up to 50%. Reduce parts consumption and extend equipment life

OIL INTERPRETING GUIDE

Tan Delta technology continuously analyses oil in real time at a molecular level, accurately tracking condition changes as equipment operation causes oil to wear. Rate of change projection enables reliable optimal maintenance forecasting and safe interval increases – thus reduced costs. Contamination or equipment issues cause trend spikes which are instantly detected, enabling immediate evaluation and action as necessary to avoid unnecessary break downs and life-shortening equipment wear.

PRODUCT SPECIFICATIONS

Name

Ex Gen II Oil Quality Sensor

Product Number

OQSx-G2 HAZ

PHYSICAL

Material

Stainless Steel AISI304

Dimensions

118mm x 46mm (L x W)

Weight

160g

Connection

32mm AF Hex Collar

Torque

25N m

AVAILABLE THREADS

Thread

Seal

1/2” BSPP

Dowty Type

1/2” NPT

n/a

7/8” UNF

‘O’ Ring

M18

Dowty Type

ELECTRICAL

Supply

+10-28.8 V DC

Consumption

0.4w Average

DATA OUTPUT / INPUT

Digital Output

RS485, CANBus

Protocols Supported

Modbus, CANOpen and J1939

OIL QUALITY DETECTION PARAMETERS

Output

Tan Delta Number (TDN)

Oil Temperature (°C or °F)

Sensitivity

01%, +

Elements

All wear and contamination

OIL TYPE

Configuration

Any mineral, semi-synthetic or synthetic

oil, including fuels (diesel & bio-diesel)

ENVIRONMENTAL

Calibrated Temperature

-20°C (-4°F) to +120°C (+248°F)

Operating Temperature

-40°C (-40°F) to +120°C (+248°F)

Fluid Temperature

-40°C (-40°F) to +120°C (+248°F)

Fluid Pressure

up to 70 bar (1015 psi)

Storage Temperature

-55°C (-67°F) to +150°C (+302°F)

STANDARDS & CERTIFICATION

Water & Dust

IP68

Shock & Vibration

BS EN 60068-2-30 (Test Db – Cyc.Hum.)

BS EN 60068-2-6 (Test Fc – Sine Vib.)

BS EN 60068-2-27 (Test Ea – Mech. Shock)

EMC

EN 61000-6-4:2007 (Generic Emissions Standard for Industrial Environments)

EN 61000-6-2:2005 (Generic Immunity Standard for Industrial Environments)

Conformity

CE Marked

RoHS Compliant

Ready to talk about business?

Book your free first consultation now!