Product

SENSE-2 DISPLAY KIT

Complete plug & play oil condition monitoring kit, inclusive of Sensor, Display Express, & all necessary cables giving you everything you need for a single installation. SENSE-2 is a complete real-time oil condition analysis and monitoring kit that can be easily installed on any equipment. It enables you to immediately secure the benefits of real-time oil condition analysis and monitoring: reduced oil use, reduced maintenance costs, pre-emptive fault detection.

Complete plug & play oil condition monitoring kit, inclusive of Sensor, Display Express, & all necessary cables giving you everything you need for a single installation.

SENSE-2 is a complete real-time oil condition analysis and monitoring kit that can be easily installed on any equipment. It enables you to immediately secure the benefits of real-time oil condition analysis and monitoring: reduced oil use, reduced maintenance costs, pre-emptive fault detection.

Actual oil condition and remaining oil life is continuously analysed, logged and displayed in real time. Configurable analytics trigger alerts in the event of unexpected contamination and/or oil wear. The built-in data logger and wireless interfaces make downloading data for further analysis simple.

SENSE-2 is a complete plug-and-play solution that can be fitted to any equipment operating in any environment using any type of oil. Everything is included for quick and easy installation.

  • REAL TIME OIL ANALYSIS – Continuous real-time oil condition analysis with 0.01% sensitivity, detecting and reporting changes caused by wear and/or contamination
  • ANY OIL TYPE AND EQUIPMENT – Can be fitted and used on any equipment type operating in any environment using any oil type – mineral or synthetic.
  • EVENT ALERTS – Immediate detection and alert in the event of contamination and or unseen equipment issues which may lead to breakdowns or damage
  • MAINTENANCE PREDICTION – Accurately predict when equipment needs maintenance based upon rate of change and accurate EoL definition
  • REDUCE MAINTENANCE COSTS – Enables you to predict and pinpoint when equipment requires maintenance and oil is truly at the end of its life. This typically enables you to safely extend intervals between maintenance and reduce associated costs by approximately 30% per year
  • REDUCED DOWNTIME – Unseen equipment issues cause subtle changes to oil condition, which are detected and alerted, enabling preemptive maintenance before failure or major damage and or accelerated wear
  • ENVIRONMENTAL (ESG) TARGETS – Safely maximise oil use to reduce consumption by approximately 30% per annum. Reduce parts consumption and extend equipment life

OIL INTERPRETING GUIDE

Tan Delta technology continuously analyses oil in real time at a molecular level, accurately tracking condition changes as equipment operation causes oil to wear. Rate of change projection enables reliable optimal maintenance forecasting and safe interval increases – thus reduced costs. Contamination or equipment issues cause trend spikes which are instantly detected, enabling immediate evaluation and action as necessary to avoid unnecessary break downs and life-shortening equipment wear.

PRODUCT SPECIFICATIONS

Name

SENSE-2 Display Kit

Product Number

SENSE-2

PHYSICAL - SENSOR

Material

Heat resistant polycarbonate

Dimensions

151mm x 66mm x 42mm (L x W x H)

Weight

300g

ELECTRICAL

Supply

+9-30 V DC

Consumption

0.4w average, continuous 200mA

DATA LOGGING

Logging Interval

5 minutes

Battery Backup

~10 years

Data Download

Via WiFi using any internet-enabled device

Real Time Clock

Yes

DATA OUTPUT / INPUT

Digital Output

1xRS485: 9600 baud half duplex to sensor 1xRS485: 115200 baud half duplex from display

Analog Output

1 x 4-20mA

ENVIRONMENTAL

Operating Temperature

-30ºC (-22ºF) to +65ºC (+149ºF)

STANDARDS & CERTIFICATION

Shock & Vibration

BS EN 60068-2-30 (Test Db – Cyc.Hum.)

BS EN 60068-2-6 (Test Fc – Sine Vib.)

BS EN 60068-2-27 (Test Ea – Mech.Shock)

EMC

EN 61000-6-4:2007

(Generic Emissions Standard for Industrial Environments)

EN 61000-6-2:2007

(Generic Immunity Standard for Industrial Environments)

EN 300 328 v1.8.1.

(Transferable Electromagnetic Compatibility for Wideband

Data Transmission Equipment operating in the 2.4GHz ISM

Band and using Wideband Modulation Techniques.)

Conformity

CE Marked

RoHS Compliant

Ready to talk about business?

Book your free first consultation now!